HOW TO USE

• Mix your desired dilution ratio in to your dedicated mixing bottle or pump sprayer.

• Working from the front bumper, starting on the lower portion, spray liberally and work your way around the vehicle applying MAJIC’s citrus pre-wash from bottom to top. Make sure heavily soiled areas (bug splats, bird droppings etc) aren’t missed and lather those areas generously.

• Rinse vehicle from top to bottom.

MAJIC TOP TIP.

Use MAJIC’s citrus pre-wash to clean wheel arches and tyres at the wheel cleaning stage.

• Mix your desired ratio in to your dedicated snow foam lance or foam sprayer.

• Working from the front bumper, starting on the lower portion, cover the vehicle liberally and work your way around applying MAJIC’s snow foam from bottom to top. Make sure heavily soiled areas (bug splats, bird droppings etc) aren’t missed and lather those areas generously.

• Leave to dwell for a maximum of 5 minutes, ensuring product doesn’t dry.

• Rinse vehicle from top to bottom.

!CAUTION!

Do not let product dry on surface and take caution when applying in hotter temperatures.

• Using the 2 bucket safe wash method, fill the first bucket with clean water (rinse bucket) and pour 2 caps of MAJIC’s shampoo in to the second bucket (wash bucket). Fill the wash bucket half way, mixing in the shampoo by swilling the water around. Once the bucket is filled half way. Use your pressure washer to fill another quarter of the way creating maximum suds.

• Using a clean wash mitt, first; rinse in the rinse bucket, then dip in to the wash bucket, picking up as much foam and suds as possible.

• Start by washing from the top of the vehicle down, minimising picking up dirt from the lower areas of the vehicle.

• Rinse wash mitt thoroughly and regularly to avoid damaging paint.

• Rinse vehicle from top to bottom.

MAJIC TOP TIP.

Place 1 cap of MAJIC’s shampoo in to your snow foam lance and fill with clean water. Spray on to vehicle before shampooing to create maximum lubrication and cleaning qualities.

• Once vehicle is clean and dry, apply MAGIC’s glass cleaner directly to the vehicles glass 2 sprays at a time.

• Use 1 clean microfibre cloth to work in the glass cleaner and another clean microfibre cloth to remove any excess residue.

MAJIC TOP TIP.

• After using MAGIC’s glass cleaner to clean glass, apply a few sprays of MAGIC’s quick detailer to give hydrophobic qualities. This will improve future cleaning and reduce windscreen wiper use when raining.

• Use 2 microfibre cloths to reduce clogging of cloths, making it harder to remove product.

• Ensure glass is cool before applying to reduce streaking.

• Fill wheel bucket with clean water mixed with 1 cap of MAJIC’s shampoo to create suds.

• Focussing on 1 wheel at a time;

• Pre-rinse wheel.

• Spray MAJIC’s wheel cleaner liberally on to the wheel surface, not forgetting barrels and around the wheel nuts.

• Leave product to break down brake dust and road grime for 2-3 minutes.

• Use dedicated wheel brushes and mitts with your wheel bucket, not forgetting around the wheel nuts and the tyre valve, to agitate dirt and loosen any stubborn brake dust and road grime. Regularly rinse brushes and mitts to avoid dragging dirt and scratching wheel surface.

• Rinse wheels.

MAJIC TOP TIP.

Use MAJIC’s ceramic detailing spray while wheel is still wet and rinse straight off for up to 8 weeks protection - this provides an immense shine and makes future cleaning easier.

• Once vehicle is clean and dry, apply to tyres using a tyre dressing applicator.

• For trim dressing, apply a small amount to either a dressing applicator or microfibre cloth and work in to desired area. Buff to finish.

• Once vehicle has been cleaned, whilst still wet, apply MAJIC’s fallout remover to the vehicle.

• Leave to dwell for 2-3 minutes.

• Once iron deposits and particles break down, they will appear to “bleed” and run red.

• Use a clean, damp microfibre cloth to gently agitate the broken down iron deposits.

• Rinse entire vehicle to ensure no overspray is left on paintwork.

• Repeat if necessary.

MAJIC TOP TIP.

Use MAJIC’s fallout remover on exhaust tips and agitate with brushes and cloths then rinse clean.

For tar:

• Once vehicle has been cleaned, whilst still wet, apply MAJIC’s tar and glue remover to the vehicle.

• Leave to dwell for 2-3 minutes.

• Once tar deposits have started to break down, they will appear to be running.

• Use a clean, damp microfibre cloth to gently agitate the broken down tar deposits.

• Rinse entire vehicle to ensure no overspray is left on paintwork.

• Repeat if necessary.

For glue:

• Apply MAGIC’s tar and glue remover to desired area.

• Leave to dwell for 2-3 minutes.

• Gently agitate with a clean microfibre cloth until glue is removed.

• Rinse entire vehicle to ensure no overspray is left on paintwork.

• Repeat or apply more product if necessary.

• Once vehicle is clean and dried, simply spray on to the vehicle surface and buff to finish.

!CAUTION!

Do not use in direct sunlight or allow product to dry on surface.

MAJIC TOP TIP.

After using MAGIC’s glass cleaner to clean glass, apply a few sprays of MAGIC’s quick detailer to give hydrophobic qualities. This will improve future cleaning and reduce windscreen wiper use when raining.

• Once vehicle is clean and dried, simply spray on to the vehicle surface and buff to finish.

!CAUTION!

Do not use in direct sunlight or allow product to dry on surface.